 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 75 Watts APC18 (18 Amps) Total Power: Input Voltages: No. of Outputs: 75 Watts 10.0V to 14.0 V Single Electrical Specs Input Input range Input Surge Efficiency 10.0V to 14.0V 15V 3.3V @ 92% (Typ) Control Enable TTL compatible (positive enable) Output Regulation (Line, Load, Temp) Load Current Ripple and noise1 Output Adjust Range Current Slew Rate Transient Response1 <3% 18A max 50mV 0.75V - 5.5V up to 2.5A/S 3% typical deviation (for 5VO) for 50% to 75% step load 200 S recovery 10% of Vo 10V (Typical) 1V (Typical) Hiccup - auto recovery Non-Isolated module Special Features * * * * * * * * * * Point of load (POL) applications High Current slew rate at 2.5A/us1 Open frame SMT High efficiency, 3.3V @ 92% (Typ) Adjustable Output through external resistor programming -40C to +85C Ambient operating temperature UVLO protection Positive Enable function Low output ripple and noise Regulation to zero load Remote Sense Turn On Input Voltage UVLO Hysterisis OCP/OTP Isolation Environmental Operating temperature -40C to +85C Storage temperature: -40C to +125C MTBF: >1 million hours Specifications subject to change without notice. Safety UL, cUL 609500 Recognized (Pending) TUV EN60950 Licensed (Pending) 2 North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Input Voltage 10.0V - 14.0V Output Voltage 0.75 to 5.50V Output Current Efficiency Full Load (Typ) 92% Model Number APC18T12-9(J) 18A Note: - 18A max output current with total output power limited to 75W - minimal output derating required - Typical Efficiency for 3.3V output; full load; nominal input voltage; 200LFM at TA=25 C - Suffix "J" designates tray packaging, non "J" is T&R Pin Assignment Mechanical Dimensions Notes: 1. 200uF and 2x 150uF input and output capacitance required. 2. All specifications are typical at nominal line, full load and 25C ambient temperature unless otherwise noted. 3. All specifications subject to change without notice. Mechanical drawings are for reference only 4. Technical Reference Notes should be consulted for detailed information 5. Warranty: 1yr VIN GND VO TRIM SENSE PIN SIDE UP VIEW ENABLE Recommended PAD Layout PAD Size MIN: 1.6 x 2.8 mm [0.065 x 0.110 inches] REC: 1.8 x 2.8 mm [0.070 x 0.110 inches] MAX: 2.0 x 3.0 mm [0.080 x 0.130 inches] PIN SIDE DOWN VIEW * Astec reserves the right to make changes to the information contained herein without notice and assumes no liability as a result of its use or application. (REV C: JUN 2, 2004) www.astecpower.com 3 |
Price & Availability of APC18T12-9
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |